Gates 425-5M-25 POWERGRIP HTD Timing Belt 425mm L* 25mm W
YOU’LL FIND AN EXTENSIVE 60.325 mm db SELECTION OF 107.73 g Initial grease fill Gates 425-5M-25 POWERGRIP HTD Timing Belt 425mm L* 25mm W BEARING CORP.OF AMERICA FOR SALE.
| Model Number: | 425-5M-25 |
| Initial grease fill: | 107.73 g |
| P60°: | 39.1 kN |
| db: | 60.325 mm |
| Ca: | 50.8 mm |
| P150°: | 12.9 kN |
| H2: | 28.575 mm |
| Appropriate attachment bolt size G: | 0.625 in |
| J max.: | 228.6 mm |
Product Details
| Initial grease fill | 107.73 g |
| P60° | 39.1 kN |
| db | 60.325 mm |
| Ca | 50.8 mm |
| P150° | 12.9 kN |
| H2 | 28.575 mm |
| Appropriate attachment bolt size G | 0.625 in |
| J max. | 228.6 mm |
| Da | 110 mm |
| Labyrinth ring (dc shaft position) | LER 23 |
| N1 | 19.05 mm |
| R2 | 19.05 mm |
| Cap bolt recommended tightening torque | 149.1 N·m |
| H1 | 76.2 mm |
| P180° | 15.6 kN |
| Mass pillow block | 9.53 kg |
| End plug (suffix Y) | EPR 5 |
| RG | 1/8 NPT |
| J min. | 196.85 mm |
| Stabilizing ring | 2 x SR-1610 |
560 8MGT 30 GATES POWERGRIP HTD TIMING BELT 8M PITCH, 560MM LONG, 30MM WIDE
Gates 1610-14M-115 PowerGrip HTD Transmission Belt 1610 mm L 115 mm W 115 Teeth
Gates PowerGrip HTD 711-3M-15 Timing Belt - USED
D&D 1050-5M-25 PowerGrip HTD Belts Lot Of 10
GATES 800-5M-25 PowerGrip HTD Belts 8005m25, New
Gates Powergrip HTD 3M Synchronous Timing Belts, pn HTD3M95